Name: electrothermal furnace

product Model: SL-500

voltage 220-240V/110-127V 50/60Hz 500W

product Size 13.5X13.5*7.5cm

heating pipe size: 155mm

material: cold rolled plate thickness 0.4mm

iron sheet thickness: 0.4mm

certificate CE(EMC/LVD) ROHS

packing: plastic bag, no foam

packing quantity: 20 sets/box

GW/NW:11KG/10KG

size:39.5*34.5*31cm

product real shot Display

mini small electric furnace, cute and compact, easy to carry, is an indispensable good product for going out and office!

Operation rules

rotating electric furnace rotary knob switch, there are 5 positions to adjust the electric furnace temperature adjust the switch to the appropriate position to make the electric furnace reach the required temperature, pay attention to when not in use, please adjust the switch to the "0"/"off" position and unplug the plug.

Safety precautions

1. No one can take care of it when using it.
2. Do not touch the heating plate surface when heating.
3. Do not immerse the electric furnace in water or other liquids.
4. Electric furnace is used to cook food for heating. When cooking food, the utensils should be on the heating plate.
5. When the electric furnace is not in use, be sure to adjust the switch to the "0"/"off" position and unplug the plug.
6. When using, do not place other sundries within 30cm around the electric furnace to prevent danger caused by blocking ventilation.

[Product introduction]]:

this product is environmentally friendly without radiation! Suitable for families of pregnant women, children and the elderly. Please do not use induction cooker for the sake of your family and your health.

2. No waste gas, no electromagnetic radiation, energy saving and environmental protection. High and low temperature can be adjusted to 1-5 gear. Manual gear adjustment, automatic temperature control!

2. Flat bottom, can be heated after being put on, (except plastic products) do not pick the material! There are requirements for vessel size and capacity!

Warm reminder:

when the electric furnace is used for several times, it takes 3 gears to dry and burn for 3 to 5 minutes. At this time, there may be a small amount of smoke and odor discharge, because the protective layer of the furnace surface is caused by high temperature evaporation, which is a normal phenomenon, this phenomenon does not occur after one use.