There are many types of laces, please consult the customer service before placing an order. There are different types of ordinary environmental protection and inspection needles, and so on.

The electroplating of the pin puller must be environmental protection non-nickel electroplating, not nickel electroplating, because this cannot pass the inspection; environmental protection requirements for electroplating must be non-nickel electroplating, nickel electroplating is not environmental protection. It is not allowed to place an order for nickel electroplating, and the note requires inspection. Similarly, it is not allowed to place an order for nickel products, and the note requires meeting environmental protection requirements, which are mutually contradictory. In the future, if there are similar orders, we will return the order, and your company must confirm clearly before placing an order to avoid disputes.
Three, Hanging Plating, Hanging Spraying, Electroplating, Requirements for High-grade Roll Plating, Pulling Head and Pulling Sheet, Hand Bending Precautions
（1） Our company handles hanging plating, hanging spraying, electroplating, and high-grade rolling plating pull heads and pull sheets by manual hand-bending processing, and then polishes the inlet and outlet. The specific reasons are as follows:
After the die casting molding, the die casting and the dross need to be separated. Our company usually adopts the following two processing methods:
(1) General normal processing method: use a roller to roll and rub against each other to separate the pull sheet from the bone residue. After the pull sheet is rubbed and hit in the roller, the feed and discharge ports of the pull sheet are polished smooth without scratching the hands; However, such a pull sheet surface will have bruised dots; This method is suitable for general roll plating and painting (for large-area pull sheets, it is recommended not to use this processing method).
(2) Special manual handling method: manually separating the strip and bone residue by hand, which can ensure that the surface of the strip will not have the phenomenon of bumping marks, this handling method is suitable for hanging plating, hanging spray, electroplating and products requiring high-grade rolling plating, but because the manual handling of the strip cannot be polished at the inlet and outlet (to prevent the strip from having bumping marks), so there will be scraping hands at the inlet and outlet positions; This is also unavoidable in mold processing and die casting production, and it is necessary to perform polishing processing at the inlet and outlet (polishing on both sides and tail/that is, polishing the mold line, and an additional charge of 0.03 yuan/piece is required).

Additional tax points will be added to the invoice, please consult the customer service for more details!

Product Information: This link is for the price of the 5# pull head. If you need other models of pull heads, please contact the customer service to send the link.

Material: 5# Nylon Electric White Wrapped Head

Origin: Yiwu

Weight: 2.4g

Applicable scope: pillow, home textiles, cushion, skirt, pants, clothing, clothing zipper
Note: The shop operates in sync with the physical store, and the usual pull-tab colors are always in stock.

Ordering Instructions:

1. This pull head has a long-term stock and can be ordered in small quantities. The one in the picture is a size 5.

2. If you have any detailed questions, please contact us through Alipay or telephone after agreement, and write a note when placing an order.

5. Quantity discounts are available. If you have a larger order, you can enjoy more discounts. Please contact us through Alipay or phone!