Shopping Before You Buy: This product is packaged in PP bags and comes with repair glue in a color box.Exclamation mark! The air tank needs to be purchased separately, dear.

1.Inflatable products have a defect rate, and we do not accept any returns or exchanges.。

2. We have made 10,000 units and measured the leakage rate to be 1-2%. However, the distribution of the 1% leakage products to which they belong is not guaranteed to be more or less, and it is very likely that you will receive one without any leakage or several. Each inflatable product is equipped with; repair glue or patch; can be repaired by oneself.

3. Please read carefully. If you intend to leave a negative review or complain about the leakage after purchase, please do not make the order. We all conduct business in good faith. We prefer to say it straight to avoid any accusations of concealment later on.

Therefore, due to the special nature of PVC inflatable products, it is unavoidable to have a certain rate of leakage and damage. However, we will make every effort to gradually improve and reduce the leakage rate, creating a larger profit space for both parties. Thank you.





























Business Use Terms:

1. After the product is inflated for the first time, it should be used after 24 hours. Do not overinflate the air, 80% is enough. Overinflation can cause the product to be tightened, leading to surface rupture. In severe cases, the tension can cause the strap to break, causing a bulge, which cannot be repaired.). Newly inflated products usually have a smell of PVC material at the beginning of use. After a few days of use, the smell will naturally dissipate, and there will be no smell.

2. New inflatable products may initially stretch slightly when inflated due to the pressure of the air. This will result in a slight increase in volume. You may feel as if the product is leaking slowly at this point, which is normal. After 2 to 3 days of use, the material will no longer stretch. Once the air is fully inflated, the product can be used normally.

3. For new inflatable products, due to the stretch of the material, it is recommended not to inflate too fully at the beginning. Just inflate to the point where the fold lines disappear (about 80% full). This gives the material a chance to stretch and adjust, which can extend the life of your inflatable product.

4. If you use inflatable products in the wild, do not inflate them too full (80% full is best). When using in the wild, please clean up the debris on the ground (sharp hard objects, small stones, etc.), it is best to lay a layer of something, such as a carpet, a cardboard box, etc. When there is rotation on the inflatable products, it will drive the rotation of the inflatable products, the material at the bottom will rub against the ground, if the inflatable is too full, it is easy to wear the material, causing the material to break and leading to the phenomenon of air leakage.

5. As the temperature rises with the change of seasons, the gas in inflatable products expands, so be sure to release some air. When the temperature drops, the inflatable products will become softer, so be sure to add some air. For one person use, you can fully inflate it, but for multiple people to use at the same time, try not to inflate it so much.

【Repairing Steps】
1. Cut the patch to fit the size of the hole or damage.
2. Clean the surface of the damaged area thoroughly; Apply the glue evenly on the damaged area and the surface of the patch.
3. Wait at least 30 minutes for it to dry;
4. Press the patch firmly onto the damaged area to ensure a full adhesion with the bed body.
5. Let it stand for at least 2 hours. Do not inflate during the standing period.