Product Name:    LED colorful lighting gas bar bubble plate       

product features:

lamp beads: Q9 9LEDs

Q12 12LEDs

straw hat spotlight beads are used, LED colors are various, with all-round foaming effect, and the bubble layer under the water is dazzling.

Bubble strip: porous gas strip

base: three removable suction disk

back: one-time molding

this product needs to be used with air pump air pipe air pump and air pipe need to purchase additional configuration air outlet hole inner diameter 4MM outer diameter 5MM

Product description:
bubble stone is commonly known as powder air stone (sand head) and gas burst device. It uses high-quality raw materials White corundum and carborundum through high-temperature sintering. It is firm and durable, with good gas dispersion and filtration. It is widely used in:
1. The sewage treatment plant is aerated with oxygen and stirred to prevent large particles of sediment from settling and to remove some organic matter.
2. Fish Pond (aquafarm) aerates the nutrient-rich water body in the environment and aerates the biological culture.
3. Transport live fish and seafood to increase oxygen.
4. Aquarium (purifier) purification, filtration and water quality Ozone Sterilization and aeration.
5. Other technological purposes that need to diffuse air.

1. Remember that the outgassing effect varies according to the oxygen pump power and air output power and the depth of water. (The greater the power, the shallower the water depth, the more uniform the air outlet effect of the air plate; Conversely, the opposite effect);

2. The Air plate is connected to the air pipe at one end, and then the air pipe is connected to oxygen pump (oxygen pump, air pipe and shut-off valve need to be purchased separately), which can be connected to 4 * 6mm or 5 * 8mm oxygen hose;

3. Before using, Please soak the bubble plate for 20 minutes, or use sandpaper to fully flatten the surface of the bubble plate, (high-power air pump can also flush the sintered gas plate surface blowhole!!!)

4. The air output in some parts of the bubble plate for the first time is uneven or there is no air output, which indicates that your air pump is not enough. Please replace oxygen pump with a higher power;

5. Long-term use, such as dirt blocking and bubble reduction, you can take it out for cleaning and repeated use;

6. Double-hole or porous air pump is recommended to use tee joint air outlet to increase by air output.