X Email Mobile
red
|
¥48.0 | 18894 piece available |
|
sapphire
|
¥48.0 | 19949 piece available |
|
light green
|
¥48.0 | 19998 piece available |
|
black
|
¥48.0 | 19898 piece available |
|
color-red shell
|
¥52.0 | 19997 piece available |
|
color-treasure shell
|
¥52.0 | 19999 piece available |
|
color-green shell
|
¥52.0 | 19999 piece available |
|
color-black shell
|
¥52.0 | 19999 piece available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Yueqi Electronics Firm 13yr.
Main Products:Electronics，Bicycle lights
Contacts:Sun AiweiChat
Mobile:86-15858998089
E-mail: WeChat:15858998089
Address:15337 , 6 Street, 2 F, 43 Gate, International Trade Mart (District 2).
1216-5 Clutch Turn Signal Brake Light
Product Parameters:
Battery 500mA charging input: DC5V Charging time: About 2 hours Product diameter: 44mm Height: 32mm Weight: 42 grams
Monochrome LED beads with 55 high-brightness beads Monochrome battery life: 12-67 hours
61 high-brightness LED beads in the glittering color model, the battery life of the glittering color model is 5-54 hours.
Function Introduction:
1: Long press the power switch for about 2 seconds to turn on or off the device, short press to switch modes, with a total of 7 modes. By default, the device starts in Intelligent Mode. By rapidly pressing the power switch 3 times consecutively, you can switch between Normal and Intelligent Modes. The green light on the switch will stay on for 3 seconds to indicate that you have entered the Normal Mode, and the brake light will stay on for 3 seconds to indicate that you have entered the Intelligent Mode. Note: The conversion between Normal and Intelligent Modes can only be performed through the button switch operation.
Second: After the initial power-on unlock, the product automatically turns on the reception function via vibration switch signal, enabling remote synchronous operation while riding. It can realize remote on/off switching and steering braking operations in response to dynamic conditions. In a static state, the reception signal function is turned off after about 5 minutes.
Three: Intelligent Mode, the device will enter a 90-second sleep mode after power-on detection of strong light without any button operation. It will automatically turn on when a dynamic signal is detected in low light conditions. It will enter a 90-second sleep mode in a static state and will be restored by vibration.
Fourth: Under normal mode, the light status is not affected by vibration and light, and the remote control can operate normally when detecting vibration signals.
5: When charging, the red indicator light for the monochrome model moves smoothly (the blue indicator light for the neon color model moves smoothly), and the charging ends when it turns off. Note: It cannot work while charging.
Update time：
TOP
