New Quick Copy Remote Controller Product Specification

1. Chip that can be duplicated:

2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200/HCS201 (partial codes), HCS300/HCS301 (partial codes), and some microcontrollers..........

2. Decoding Method:

Press the 'A' key and the 'B' key simultaneously, and the LED indicator will blink three times. Release the 'B' key and keep pressing the 'A' key. Click the released 'B' key three times, and the LED indicator will enter a rapid flashing state. At this time, all the data in the memory will be cleared. After clearing the data, the remote control will not light up no matter which button is pressed.

3. Duplication Method:

Hold the original remote control in one hand and the clone remote control in the other, keeping both as close as possible (ideally, place the two remotes side by side on the table with no space between them). Press the buttons for the desired clone operation, and after the LED indicator flashes three times quickly, it will continue to flash rapidly, indicating that the clone has been successful. The operation for other buttons is the same. If the original remote control has a smaller transmitting power, it should be operated back-to-back with the clone remote control for a successful clone. If there are interference in the operating environment, avoid operating in that environment. If the clone is not working well, clear the code and try again. (Important: The remote control in your hand must be functioning normally and has the same frequency as our remote control.)

4. Features of the New Dual-Copy Remote Control:

The four buttons can respectively copy four different types of chips, that is, one remote control can operate four different types of facilities.。

5. Common garage door, retractable door, barrier gate, parking space lock, and security alarm brands that can be copied:

Dalian Xisided Series (including New Somar), Hangzhou Menren Series, Shenzhen Zhongtian A/Zhongtian B, Foshan Hosai White/Hosai Blue/Hosai Clear/315MHz Hosai Sliding Door, Ningbo Duya 1/Duya 2, Ideal Series, Yantai Shengda Series, Yantai Boda Series, Shenyang Haitong Series, Shenyang Weilai Light Red/Green (including Weld Code and Learning Code), Xujie S60/S66 Series, Hongmen Series, Speed Series, Changshun Series, Master Series (including Learning Code), Shenzhen Shunchang Series, Jiangxi Baisheng Damolas Series (including Weld Code, Learning Code, Rolling Code), Juguang Series, Haizhu Series, Haiyu Series (including Sharp 315MHz), Jiahe Series (including Jiahe 315 Special Rolling Code), Iron General Fixed Code Series...............