X Email Mobile
4 points faucet with key | ¥0.0 | 1844 piece available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Shandong Shenglong Trading Co., Ltd. 2yr.
Main Products:Plumbing fittings, sanitary ware, water pipe, faucet, shower, water meter
Contacts:Mr.LiuChat
Mobile:86-15318225958
E-mail: WeChat:15318225958
Address:No. 28, Area A, Soil Complex Market, intersection of Beiyuan Road and Qingyang Road,Lanshan District,Linyi City City,Shandong Province
Related items
On the day of the event First, use the coupon, then make a purchase. Date: 2019.3.28 | ¥5"领取"的英文翻译是 "pick up" 或 "collect"。 | ¥10"领取"的英文翻译是 "pick up" 或 "collect"。 | ¥30"领取"的英文翻译是 "pick up" 或 "collect"。 | ¥50"领取"的英文翻译是 "pick up" 或 "collect"。 |
Additional tax points will be added to the invoice, please consult the customer service for more details!
Please contact the customer service immediately after placing the order to modify the shipping fee.
Small items sent by courier, large items sent by logistics.
Notes:
This product comes with a default without a decorative lid! If you need a decorative lid, please communicate with the customer service in advance!
(1) Hold the connector with one hand and press the clasp with the other to pull it down, separating the connector from the inlet pipe.
(2) Loosen the four screws on the upper connector, and remove the connector, leaving a 3-thread gap between the upper and lower connectors. If the faucet is too large, you can remove the plastic guide sleeve inside.
(3) Adjust the four screws of the connector evenly, ensuring that the two screws near the wall fully contact with the outside of the faucet. The screws near the wall can be pre-rotated slightly by hand.
(4) Insert the upper connection head against the faucet, ensuring that the internal seal ring fully contacts the faucet. Note: Do not remove the seal ring, and ensure that the faucet opening is flat.
Rotate the two screws on the side of the rotating wall to make contact with the faucet, and then tighten them with a screwdriver.
(6) Rotate the connecting head until it is tightened to the position where the upper and lower connecting heads are in contact. The gap between them should be less than 3mm.
(7) Press the clasp of the washing machine pipe downwards.
Insert the water supply pipe upward into the lower connection base, and then loosen the clasp ring.
(9) Check for leaks, if any, and reinstall if necessary. Ensure that the faucet is a standard one.
Update time:
TOP