Additional tax points will be added to the invoice, please consult the customer service for more details!

Daily maintenance tips for a faucet:

1. When installing a new faucet in a house, first drain water to flush out any sand or impurities in the pipes to prevent blockages and affect the water flow.

2. Please install the faucet by a professional with experience and qualifications. When installing, the faucet should not be knocked against hard objects or touched by cement, glue, paint, etc., which may cause wear, damage, or corrosion to the surface of the faucet.

3. After prolonged use, the water flow from the faucet may decrease. To restore the flow, you can remove the aerator with a tool, clean the filter, and then carefully reinstall it.

4. It is particularly important to open and close the faucet gently, as any reckless or deliberate forceful actions could damage the seal of the faucet and cause a malfunction.

5. It is recommended to clean the faucet with soft cloth and clean water to maintain its luster. Avoid using cleaning agents or acidic or alkaline solutions with corrosion.

Method of Maintaining the Head of a Dragon

The faucet plays a very important role in the sink accessories. Many consumers experience leakage of the faucet due to improper use and lack of maintenance awareness, which brings a lot of inconvenience to kitchen life. In fact, as long as the installation, use, and maintenance are done correctly, the actual service life of the faucet can be extended for a long time, and it can maintain its luster as new.

1. Uneven or low water flow: This may be due to the tap spout (also known as the aerator) becoming clogged with impurities due to poor water quality. To solve this, remove the spout and clean it with an old toothbrush. Another possibility is that the intake soft pipe of the tap is clogged with impurities. To fix this, remove the soft pipe and clean it.

2. Unable to stop the water: It must be a problem with the valve core. You can remove the red and blue labels, use an internal hexagon tool to remove the faucet handle, and replace the valve core (this is usually best handled by professionals or the manufacturer).

3. The chrome plating on the faucet surface becomes mottled or appears as water mist: simply wipe the water away with a dry cloth, and if it's severe, clean it with vinegar.

Special Note: Do not use steel wool to clean the surface of the faucet!

4. When you turn on or off the faucet, do not exert too much force. Just turn it gently as long as the direction is correct. Do not think that if you don't apply much force, the faucet will leak and cause waste. In fact, this is not the case. Even with traditional faucets, do not exert too much strength to tighten them. If you do this over time, it will actually accelerate the damage to the valve core inside the faucet. Do not use the faucet as a handrail to support your body or other heavy objects, as this may cause the faucet to loosen and leak due to excessive load.