AY-23 Alarm Clock Wireless Charging

Functional Operation Instructions:

First turn on the power (DC5V), scan displays 1 to 9, display PM, AL, TEMP points, and then display the time and temperature.1. Press the RESET KEY (located in the bottom hole) with a metal needle smaller than 1.4mm for more than 2 seconds, resetting the clock time to 00:00:01/01/00.

2. Setting the Time: (When displaying the time, perform the following operations)

2.1 Long press the M key: Enter the 12/24-hour setting, press the ▽/△ key briefly to switch, then press the M key again to set the time, minute setting, and exit the time setting.

2.2 When entering the above setup mode:

Short press ▽: Add hours, add minutes, switch between 12/24-hour format;

Press △ to decrease hours, decrease minutes, or switch between 12/24-hour formats.

2.3 When displaying the time, long press the △ key to switch between Celsius (C) and Fahrenheit (F) for temperature display.

3. Date and Time Setting Method:

When displaying the time, press M briefly to display the date. At this time, long-press M to enter the setting year, month, and day, and then press M briefly to set three ALARMS.

When entering the above setting mode, press the ▽ briefly to set the year, month, and day, and ALARM on/off. When the ALARM is displayed, long-press the M to enter the setting of the ALARM time, and △/▽ to change the ALARM time.

4. DP Mode Setup Method:

When displaying the time, press the ▽ briefly to enter the DP settings.

Press the ▽ button briefly to change the 3DP mode.

Press M to exit DP settings.

DP=1: Display 10s time, 2S date, alternately switch;

DP=2: Only shows the time, does not display the date.

DP=3: Keep the current display.

5. Display Brightness (Bright) Setup Method:

When displaying the time, press the △ button briefly to enter the brightness (br) setting.

Press △ briefly to change the brightness (br) mode of the 5 displays.

Press M to exit the brightness (br) setting.

Display brightness (br) as follows:

0: Display brightness according to time

1—4: The brightness increases in order from low to high.

5:5S after screen off mode.

In the setting mode, no button for 30S returns to the display time state.