double-station blister mask, mask equipment blister equipment

Single-head dual-station vacuum molding mask vacuum molding machine manufacturer
Single-head dual-station vacuum-forming mask machine manufacturer Yiwu Yuchen Mechanical Equipment Co., Ltd. Pujiang Kedi Mechanical Equipment Co., Ltd. National 24-hour customer service hotline: 13777915888
1. The mechanical design is reasonable, the workmanship is fine, the structure is simple, the operation is convenient, and the performance is stable, suitable for small and medium-sized vacuum forming manufacturers.

2. Using infrared ceramic heating bricks and an independent variable-speed temperature regulation system, it is convenient for the production of high-difficulty products.

3. Semi-automatic operation or manual operation can be selected at will, suitable for operation by personnel of various skill levels.

4. Enhanced cold air, increased production efficiency.

5. Automatic and secondary molding are adapted for the production of products that are difficult to peel off.

Factory Real Shot

Device Parameters

Single-head dual-station vacuum masking machine manufacturer heats the plastic sheet material, completes the molding action and product shaping in the molding station, and then transports the semi-finished products after molding by the chain. Then, the automatic punching station completes the feeding, punching, stacking, and counting, and automatically pushes the designed number of products to the packaging platform. The scraps are automatically coiled into a roll, completing the production of the product.

1. Molding width: 400mm

2、Molding Length: 1000mm

3、Molding Height: 300mm

4、Production Efficiency: 60-120 times/hour

5. Power Supply: 380V/220V　50Hz (Three-phase Four-wire)

6、Power Consumption: 13KW

7. Requires a 5HP air pump.

8、外型尺寸：88"×39"×71"

9、Weight: 400Kg

Sample Display

Function and Purpose

Before testing the vacuum forming machine, it is necessary to inspect the entire machine to remove any obstructions that may interfere with normal operation. Check the electrical and circuit components for any damage, moisture, or loose connections. If there are any problems, they must be repaired in time. Additionally, before turning on the power, all switchgears should be set to the stop position, and the manual and automatic switchgears should be set to the manual position.
1. The equipment is composed of 9 workstations: manual feeding, double furnace heating, anti-sagging, blowing bubbles, molding, cooling, reverse air blowing to remove the film, lower the mold platform, and rise the pressing frame, followed by manual removal of the parts.
2. The machine is mainly composed of a frame, a molding device, a heating device, an air control system, and an electrical control system.
3. The heating method uses dual-sided heating, which is composed of carbon fiber mid-wave heating tubes, support frames for installing the heating tubes, and ceramic joints, among other components. It is controlled by an electric motor synchronously. The carbon fiber heating tubes provide quick heat synchronous preheating, and when not in use, the power is turned off to save a significant amount of energy.
4. The pneumatic and vacuum systems mainly include vacuum pipes, vacuum pumps, vacuum chambers, vacuum tanks, and double vacuum angle seat valves, etc.

Small vacuum forming machine Semi-automatic vacuum forming machine Mask vacuum forming machine Mainly used for various PET, APET, PETG, PVC, PS, PP, PC, ABS and other environmental protection materials plastic products vacuum forming, can be vacuum formed plastic sheet into different shapes of bubble shield or bubble shell.
Important Note:
The new product research and development of this model has been actually produced, with excellent quality and stable performance, which can completely replace imported machines.
(2) Human-computer interface microcomputer touch-screen control system, intuitive operation and easy to use touch screen display and operation
Digital variable speed pull film, can change the speed and length at will, the length of the pull film is particularly accurate, and you can change the length of the pull film by pressing the digital key (1mm)

 
Yiwu Yuchen Mechanical Equipment Co., Ltd.

Pujiang Kedi Mechanical Equipment Co., Ltd.

24-hour Contact Phone: 13777915888

Address: Building E29, Wanyang Creative City, Zhengzhai Town, Pujiang County, Jinhua City, Zhejiang Province