cross-border color copy wireless remote control little thumb garage door mutual-duplicating remote control remote control 433mhz 跨境彩色拷贝无线遥控器 小拇指车库门对拷遥控器 433MHZ

Product Description of New Fast-Copy Remote Control

Exports to European, American, and Middle Eastern countries (Brazil, Italy, Germany, UK, Russia, France, Netherlands, Australia)

New fast-copy type remote control product description

1. Chips that can be cloned:

2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200/HCS201 (some code), HCS300/HCS301 (some code), some microcontrollers......

1. Chips could be copied

2260 (all manufacturers); 2262 (all manufacturers); PT2264, 5326 (all manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers); 1527 (all manufacturers); 2240 (all manufacturers); HCS101, HCS200/HCS201 (part code), HCS300/HCS301 (partial code), part single-chip microcomputer......

2. Coding Clearing Method:

While holding both the unlock and lock buttons (some cases have up and down buttons), the LED indicator light flashes three times. Release any button you pressed, but keep the other button pressed. Click the released button three times, after which the LED indicator light enters a rapid flashing mode. At this point, all data in the memory is cleared. After the data is cleared, no matter which button is pressed on the remote control, the LED indicator light will not light up.

2. Code cleaning method:

Press the unlock button and the lock button simultaneously (some models use the up and down buttons). After the LED indicator light flashes three times, loosen either button while keeping the other pressed. Then press the released button three times; the LED indicator will enter fast flashing mode. At this point, all memory data is cleared, and the cleaned remote control will no longer have an LED indicator, regardless of which button is pressed.

3. Copying methods:

One person holds the original remote control, while the other holds the duplicate remote control. Try to keep both remotes close together (ideally, place them side by side on the table at zero distance). Press the respective buttons for the duplication process. After the LED indicator lights flash rapidly three times and then again quickly, the duplication is successful. The operation for other buttons is the same. Some remotes have lower power output; it is better to operate them back-to-back with the original remote control for effective duplication. In environments with interference, avoid such interference during operation. If the duplication does not work well, clear the codes before attempting again. (Very important: the remote control you are using must function properly and have the same frequency as our remote control.)

1. 3. Copying Method

One hand holds the original remote controller, while the other holds the copy remote controller. The two remote controllers should be placed as close together as possible (the ideal situation is to place them side by side on the desktop with no distance between them). Press the copy button respectively. When the LED indicator light flashes rapidly after three flashes, the copy is successful. Other operation methods are the same. Some remote controllers have lower transmission power, so the original remote controller should be placed back onto the copy remote controller for use. To avoid interference due to noise, it is necessary to prevent any interference during operation. If the copy fails, re-copy it after clearing the code. (Note: Your original remote controller must still function properly and be identical to the original.) r remote control frequency

4. Features of the new dual-mode remote control:

Four buttons can respectively copy four different types of chips, meaning a remote control can operate four different types of devices. The data copying process is fast, with low risk of data loss, and works over long distances.

1. 4. Features of the new copy remote control

The four buttons can respectively copy four different types of chips. In other words, a remote control can control four different types of facilities. Faster data copying speed, no risk of losing the code, and capable of operating over long distances.

Product Introduction:

Performance Features:
1. The design is compact and attractive, requiring no wiring.
2. Ready-to-use, easy to install and use.
3. Utilizes wireless radio frequency technology, featuring long transmission range, no directionality, high transmission sensitivity, and no signal obstruction.
4. The casing is manufactured using imported high-quality ABS flame-retardant material, ensuring safety and reliability.