& nbsp; Reminder:
1: not what strap can be demolished, please note! The set of three steel belts are red rough thickness of 1.0mm, suitable for some steel hole.
2: two claws open within the package Not all of the capping can be opened, only open part of the capping table Note that the two claws open the tooth tip is 2.1mm diameter, that is to say your bayonet diameter To be greater than 2.1mm can be used! You can open a watch within the range of 3.50 cm to the cover on the cover subject!
3: Phillips screwdriver kit size is suitable for cross-section screw diameter 2.4mm.
4: The operation is not good, the thimble will be off, due to improper operation, damage to the tool or strap
13 sets of repair table tools include:
1. Two feet open the spoon:
Open and lock screw-in bayonet cover with the tools! Directly with the tool in front of the two feet aligned with the cover of the gap turn counterclockwise. You can easily open the watch bottom cover.
2. Open the end of the knife:
One of the tools used to crimp the bottom of the watch, pry the knife.
3. Dismantling the strap:
If your watch is new, use it when you remove the strap.
4. Health and ear batch:
Dedicated to the hands and ears between the case and strap removed.
5. Red clamp:
Unwrapped watches are inevitably used to pliers, such as the split strap used to clip the hairpin, pin and so on.
6. Break the table with rice word seat:
Remove the watch chain, the bracelet clip in the plastic holder on the shelf. Conveniently attach or detach the strap.
7. Red handle cross screwdriver:
For mechanical internal demolition purposes.
8. Small plastic hammer:
After the strap is removed, it is used to beat the hands. It can also be used in other places as needed.
9 small red three:
Steel strap length to be used
10:
A small screwdriver three